An iPad stuck in headphone mode prevents the user from hearing the sound coming from the device’s speakers. First of all, I want to tell you that this case is quite different from the other cases like the iPad stuck on the Apple logo or if it’s stuck on the passcode screen. In this case, basically, the iPad works but the sound doesn’t come out and it seems like the headphones are plugged in.
If you are also in the situation of having the iPhone / iPad stuck in headphone mode, this article will help you out. In this article, I will share the tips through which you can easily fix this problem.
I will also share a tip as to how you can use iTunes to get out of this problem. This tip will be a masterpiece, which is why I want to share it, as it can be used to fix many problems. like whether your iPad stuck in headphone mode or the iPad stuck on the apple logo. It will work for both, so don’t forget to read that specific section. even the procedure is the same to solve such problems.
There are several reasons why an iPad is stuck in headphone mode:
You won’t be able to hear audio from apps, calls, music, videos, and other sources if your iPad is stuck in headphone mode for the following reasons.
- Water or other physical harm has caused damage to the headphone jack.
- The headphone jack is clogged with dust or lint
- Errors in software, such as the iPad’s iOS 10/11/12/13/14 update, and improper operations
- Problems with the iPad system
Your iPad will remain in headphone mode with no sound even if you don’t connect in your headphones. You can only see the volume bar that says “Headphone” no matter how many times you press the volume up or down buttons. In other words, your iPad pretends that the headphones are connected when they aren’t.
Take out and connect the headphones several minutes later to exit the headphones mode
Maybe your iPad doesn’t recognise that you’ve already unplugged your headphones.
Therefore, you can plug in the headphones and remove them many more times.
As a result, the iPad can detect that the headphones have been pulled out and then automatically lock the iPad into headphone mode.
Clean the headphone jack to recover iPad stuck in headphone mode
Before cleaning the headphones, you would have better backed up the iPad data . You know, accidents can occur that can damage your iPad or cause data loss, due to inappropriate operations.
You can use a toothpick or needle to remove any dust or dirt from the headphone jack. In most cases, people tend to ignore cleaning those parts, mainly the iPad screen. It’s no surprise to see the iPad with a lot of dirt inside the jack, which kills the 3.5mm headphone jack and causes the iPad to freeze in headphone mode.
Try another pair of headphones to turn off headphones mode on the iPad.
If the two methods described above are useless for unlocking the iPad, you can try another set of headphones to check. Sometimes the iPad does not recognize low-quality headphones correctly.
Also, your iPad got stuck in headphone mode due to damage from water and other liquids.
Restart Your iPad
Because restarting your iPad can help in a variety of scenarios, it is one of the remedies available. When the red slider appears, drag it to switch off your iPad by pressing and holding the sleep/wake button. To turn on the phone, press and hold the sleep/wake button.
If you can’t restart your iPad for whatever reason and don’t see the slider, you can execute a soft reset. It will not remove any of your information.
Plug-in and unplug the headphones several times.
It is likely that your iOS device did not recognize the disconnection of the headphones and is therefore stuck in headphone mode. Try reconnecting the headphones and then disconnecting them. Try this operation several times.
Use A Bluetooth Speaker
You could try using a Bluetooth speaker that is compatible with your device. Play music on your iPad by connecting it to a speaker. Turn off Bluetooth while listening to music on the Bluetooth speaker.
Reset All iPad Settings
Your iPad’s settings will be reset to factory defaults as a result of this process, but your data will not be destroyed.
To reset all settings, go to Settings> General> Reset> Reset All Settings. To confirm your action, tap “Reset All Settings.”
Restore Your iPad To Factory Settings via iTunes
This is the tip I mentioned above, which will help you to troubleshoot all the problems related to being stuck with an iPhone or iPad, so if you have tried all the methods and nothing seems to work, I will suggest one more thing to try before heading to the Apple Store. Using iTunes, you may restore your iPad to factory settings. Make sure you have the most recent version of iTunes on your Mac or PC before you begin.
- Connect the iPad to the Mac / PC using a Lightning cable.
- Open the iTunes software.
- On the Summary tab, click Restore.
- The firmware will be downloaded first through iTunes.
- Allow the restoration process to finish..
- When done, set up your iPad as a new device.
We have listed the most effective solutions that can help you fix your iPad stuck in headphone mode.Many users who have run across the same issue could solve it by using one of the solutions listed above. However, if you have tried all the solutions but still have the same problem, contact Apple.
These problems / solutions are found and effective on the iPhone 4, iPhone 4s, iPhone 5, iPhone 5s, iPhone 5c, iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus, and iPhone SE.